BSTRY - NAIL POLISH REMOVER LV11-63-AD
- MSDS: BSTRY
- Manufacturer: NICE PAK PRODUCTS INC
- Product Name: NAIL POLISH REMOVER LV11-63-AD
- National Stock Number: 8510-00N048478
Product Identification
Product ID:NAIL POLISH REMOVER LV11-63-AD
MSDS Date:01/18/1990
FSC:8510
NIIN:00N048478
MSDS Number: BSTRY
Responsible Party
ORANGEBURG, NY 10962-1376
US
Emergency Phone: 914-365-1700
Info Phone: 914-365-1700
Cage: 59825
Contractor
Telephone: 914-365-1700
Cage: 59825
Ingredients
1,3-BUTANEDIOL; (BUTYLENE GLYCOL)
CAS: 107-88-0
RTECS: EK0440000
OSHA PEL N/K
ACGIH TLV: N/K
ACETIC ACID, ETHYL ESTER; (ETHYL ACETATE)
CAS: 141-78-6
RTECS: AH5425000
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM;500 STEL
ACGIH TLV: 400 PPM;500 STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NOT RELEVANT
Medical Cond Aggravated by Exposure:PROLONGED CONTACT MAY CAUSE
IRRITATION OR DERMATITIS, HEADACHE, NAUSEA, VOMITING, OR NARCOSIS.
First Aid
First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. INHAL: REMOVE
TO FRESH AIR. INGEST: CALL MD IMMED . SKIN: FLUSH WITH COPIOUS
AMOUNTS OF WATER. CALL MD .
Fire Fighting
Flash Point Method:TOC
Flash Point:33.0F,0.6C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL, ALCOHOL TYPE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MAY PRODUCE A FLOATING FIRE HAZARD.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. ABSORB WITH
VERMICULITE AND COLLECT FOR DISPOSAL AS HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN TIGHTLY SEALED DRUMS, AWAY
FROM HEAT AND SOURCES OF IGNITION.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST. MECHANICAL (GENERAL): EXHAUST HOOD.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Work Hygienic Practices:NORMAL GOOD HOUSEKEEPING PRACTICES SHOULD
APPLY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:0.885(H*2O=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS LIQUID WITH ACETATE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:INCINERATE IN A FURNACE WHERE PERMITTED UNDER
APPROPRIATE FEDERAL, STATE AND LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.